PRODUCTSProduct Information

Electric Power TransmissionHydraulic Compression Tools

Engine-driven hydraulic pump and heads

This hydraulic pump is driven by a gasoline engine and works with a 100-t and 200-t compression head.
This pump is connected to the compression head via a hydraulic hose and is used for making compression joints of electric wires and cables. Powered with a four-cycle air-cooled engine, this pump is easy to start and easy to maintain.

(Pump specifications)

Model SEP5B-CE
Rated pressure 68.6 MPa
Pump capacity
(Discharge)
Low pressure (4.9 MPa): 13.4 L/min.
High pressure (68.6 MPa): 2.4 L/min.
Outline dimensions 590 mm (W) x 430 mm (D) x 525 mm (H)
Weight Approx. 61 kg
Fuel Regular unleaded gasoline
Compatible
compression head
Model SR100C2-CE, Model SR200M-CE

(Head specifications)

Model SR100C2-CE SR200M-CE
Nominal compression force 980 kN (100 tons) 1960 kN (200 tons)
Rated pressure 68.6MPa
Maximum diameter of sleeve that can be compressed φ76mm φ90mm
Weight Approx. 33 kg Approx. 98 kg

Motor-driven hydraulic pumps (Type SMP1)

SMP1-1

This type of hydraulic pump is driven by a motor and works with a 100-t compression head.
The pump is connected to the compression head via a hydraulic hose and is used for making compression joints of electric wires and cables.
It is suitable for compression work for underground lines and inside buildings.

Model SMP1-1 SMP1-2
Rated pressure 68.6MPa 
Pump capacity
(Discharge)
at 50 Hz
Low pressure
(4.9 MPa): 5.4 L/min.
Intermediate pressure
(19.6 MPa):1.0 L/min.
High pressure
(68.6 MPa): 0.5 L/min.
Low pressure
(4.9 MPa): 6.5 L/min.
Intermediate pressure
(19.6 MPa):1.2 L/min.
High pressure
(68.6 MPa): 0.6 L/min.
Outer dimensions 590 mm (W) x 380 mm (D) x 525 mm (H)
Weight Approx. 60 kg
Power supply Single-phase 100 VAC Single-phase 200 VAC
Compatible
compression head
Model SR100C2-CE

(This type of pump can be customized to operate at any voltage at your request.)

Motorized hydraulic pumps (Type SMP3)

SMP3

This type of hydraulic pump is driven by a motor and works with a 100-t and 200-t compression head.
The pump is connected to the compression head via a hydraulic hose and is used for making compression joints of electric wires and cables.
When supplied with single-phase or three-phase 200 V (220 V) power, the pump achieves high-speed and highly efficient compression work for underground lines or inside buildings.

Model SMP3 SMP3-WI
Rated pressure 68.6MPa 
Pump capacity
(Discharge)
at 50 Hz
Low pressure
(4.9 MPa):10.7 L/min.
High pressure
(68.6 MPa):1.9 L/min.
Low pressure
(4.9 MPa):8.6 L/min.
High pressure
(68.6 MPa):1.9 L/min.
Outer dimensions 590 mm (W) x 380 mm (D) x 525 mm (H)
Weight Approx. 62 kg Approx. 67 kg
Power supply Three-phase 200 VAC (50/60 Hz) Single-phase 220 VAC (50 Hz)
Compatible compression head Model SR100C2-CE, Model SR200M-CE

(Other voltages can be supported on a case-by-case basis.)

Manual compression tool (Model SH-12C2)

SH-12C2

This compression tool is composed of a pump and a head, and it allows for manual compression with a force of 12 tons.
This tool is equipped with a double-acting mechanism and has a structure that prevents sleeve jams. As such, it is mainly used for making compression joints of distribution lines.
It is capable of holding a sleeve before starting compression to achieve accurate compression.

Model SH-12C2
Nominal compression force 117.7 kN (12 tons)
Rated pressure 68.6MPa
Maximum diameter of sleeve that can be compressed φ30mm 
Outer dimensions 580 mm (W) x 70 mm (D) x 180 mm (H)
Weight Approx. 5.9 kg

Hydraulic cutter (Model SRK48)

This cutter allows for highly efficient cutting of electric wires when used in combination with a variety of pumps designed to work with a 100-t head or a 100- and 200-t head. The cutter is equipped with a double-acting mechanism and has a structure that prevents the blade from getting stuck during cutting. It can also be used upright on the optional base designed specifically for it.

SRK48

Single-purpose frame (optional)

Model SRK48
Rated power 134 kN (13.7 tons)
Rated pressure 68.6MPa
Maximum diameter of
electric wire that
can be cut

Steel-core aluminum stranded wire
1,160 mm2 (φ46.2 mm)

Hard-drawn aluminum stranded wire
1,260 mm2(φ46.2 mm)

Hard-drawn copper stranded wire
1,000 mm2 (φ41.6 mm)

Aluminized steel stranded wire
240 mm2 (φ20.0 mm)

Outer dimensions 414 mm (W) x 96 mm (D) x 194 mm (H)
Weight Approx. 9 kg (Base: 6.5 kg)
Compatible pump SEP5B-CE, Model SMP1, Model SMP3


* The blade is a consumable part and can be replaced.

Pole crusher (Model SPC-40)

SPC-40

This device works with a variety of pumps to crush removed telephone poles. It can crush telephone poles with a diameter of 190 mm to 400 mm.
This pole crusher works effectively in narrow areas inaccessible to large heavy machinery.

Model SPC-40
Rated output 343 kN (35.0 tons)
Rated pressure 68.6MPa
Outer diameter of telephone pole that can be crushed φ190 mm to φ400 mm
(An accessory attachment for small-diameter poles is necessary for crushing telephone poles with a diameter of 190 mm to 280 mm.)
Outer dimensions 680 mm (W) (excluding the handle) x 620 mm (H)
Weight Approx. 60 kg
Compatible pump SEP5B-CE, Model SMP3

All Products

Main Products

Product List

hydraulic joints