V Blender Dry Powder Mixer Blending Machine V50 - V300

V dry powder mixer blending machine is suitable for use in the pharmaceuticals, chemical and food industries for mixing powder or granular materials.

$2,549.00 USD
* V Capacity:
* Power Supply:

Also bought

Introduction

V type dry powder mixer blending machine is suitable for use in the pharmaceuticals, chemical and food industries for mixing powder or granular materials.
The cylindrical structure is the distinguishing feature and the mixing ability is well-proportioned and efficient with no blind spots in the cylinders and no accumulation of materials.
V type dry powder mixer machine is straightforward and it is easy to operate with the surface that is easy to clean in a highly finished stainless steel.

Working Principles: The reducing mechanism drives the barrel rotary, and the length of two barrels is different, which will produce asymmetry. And then the machine take advantage of this asymmetry for mixing materials. When the machine is running, materials from the decomposition to the combination, as potential energy differences, which will produce lateral force to promote the horizontal exchange of materials; and materials from the combination to the decomposition, as materials plane differences, which will produce lateral force to promote the horizontal exchange of materials again. The barrels rotary one cycle, which will make 25% of materials flow from one barrel to the other one; at the same time the materials will also produce radial flow, and then the materials can horizontally and radially decompose, alternating combination, so that the materials can mix evenly.

Operation and Maintenance: 1. Connect the power first, setting the required mixing time, then turn on the switch, the machine begin running. 2. After the mixing, if you found that the position of discharging port is not the best position, you should turn off the power first, and adjust the position of discharging port. 3. Before you use the machine, you should check the appliance, if it is normal; and check the covers of mixing barrels, if the covers are tightly closed. 4. User should clean the machine after the finish of work, especially the barrels, prevent the residual materials. 5. Note that the reducer should be added enough lubricating oil(generally use the 30 # machine oil), and the transmission should be added grease lubricant. 6. Users should maintain the machine once each half of year, change the lubricating oil of reducer, check if the appliance is aging, the appliance should be replaced if it is aging. 7. After you have been using the machine for one year or more, you should make a big maintenance, check the gab between each parts, and appropriately adjust them, so that the machine can keep in good condition.

Specifications

Model V-50 V-100 V-200 V-300
Volume 50L 100L 200L 300L
Max. Filling Capacity 20L 40L 80L 120L
Best Filling Capacity 14L 28L 56L 84L
Power 0.75KW 1.1KW 1.5KW 1.5KW
Rotational Speed 20r/min 15r/min 15r/min 15r/min
Dia. Of barrel Φ300mm Φ350mm Φ450mm Φ500mm
Dia. Of Inlet Φ160mm Φ250mm Φ300mm Φ300mm
Dia. Of Outlet Φ80mm Φ80mm Φ100mm Φ100mm
Dimensions(mm) 1350x450x1160 1900x800x1190 2010x850x1440 2220x900x1470

Remarks

  • Place the machine on a flat and sturdy surface so it will run smoohtly and effciently.
  • Before use, check the gear reducer to ensure there has enough oil.
  • Run an empty load. Check carefully to make sure the machine is under good condition.
  • The materials should not exceed 40% of the cylinder's limit.
  • It is necessary to clean the hopper completely when changing materials or when finishing a run.

review(s)

Very happy

I am very satisfied with the second purchase. Service enthusiasm

From: sevide | Date: 3/1/2021 1:10 AM

Was this review helpful? Yes / No (0/0)

Write your own review

  • Only registered users can write reviews
Rating:

Also Offers

Related products

Our Team

As an expert in the pharmaceutical and pharmaceutical packaging industry, iPharMachine has provided solutions for hundreds of pharmaceutical and health product manufacturers for 17 years. By visiting customers, we get good reviews from our customers.

Recently viewed

v blender