Skip to Main Content


This information is provided free of charge by the Department of Industrial Relations from its web site at www.dir.ca.gov. These regulations are for the convenience of the user and no representation or warranty is made that the information is current or accurate. See full disclaimer at https://www.dir.ca.gov/od_pub/disclaimer.html.
 
Subchapter 7. General Industry Safety Orders
Group 13. Cranes and Other Hoisting Equipment
Article 98. Operating Rules
Return to index
New query

§4994. Hoisting.



(a) Cranes shall not be operated with wheels or tracks off the ground or working surface at any time unless properly bearing on outriggers or stabilizers. Power actuated jacks (outriggers or stabilizers), where used, shall be provided with means to prevent loss of support under load.

(b) Outriggers or stabilizers shall be used when the load to be handled at that particular radius exceeds the rated load without outriggers or stabilizers as given by the certified agent for that crane.

(1) Where floats are used they shall be securely attached to the outriggers or stabilizers.

(2) Outrigger or stabilizer supports shall:

(A) Be strong enough to prevent crushing;

(B) Be free from defects.

(3) Outriggers or stabilizers shall be set in accordance with the crane manufacturer's specified configuration requirements for the capacity chart being used. If the crane manufacturer is no longer in business or if the crane manufacturer's specifications regarding the deployment of outriggers or stabilizers is no longer available, the outriggers or stabilizers shall be deployed as specified by a qualified person.

(4) If needed to support the load of an outrigger or stabilizer so as not to exceed the allowable bearing capacity of the underlying material or to establish a level condition for the crane, timbers, cribbing or other structural members shall be used. When used, timbers, cribbing or other structural members shall be strong enough to prevent crushing and be of such thickness, width, and length as to completely support the outrigger or stabilizer float.

(5) When a crane is equipped with stabilizers, the stabilizers shall be used in accordance with American Society of Mechanical Engineers (ASME) B30.22-2010, Section 22-3.2.4, and/or B30.5-2011, Section 5-1.2, which are incorporated herein by reference. For construction industry outrigger and stabilizer use requirements, see Construction Safety Orders, Section 1611.2(q).

(c) The brakes shall be tested each time a load approaching the rated load is handled by raising the load a few inches and applying the brakes.

(d) The load or the boom shall not be lowered below the point where less than two full wraps of rope remain on grooved drums and three full wraps on ungrooved drums.

(e) When two or more cranes are used to lift one load, a qualified person, other than the operators, shall direct the operation. This person shall analyze the operation and instruct all personnel involved in the proper positioning, rigging of the load, and the movements to be made. A qualified person shall be in direct audible communication with both crane operators at all times to direct the lifting operation. Where two cranes or more are used to lift one load, the rating chart shall be reduced on each crane by not less than 25 percent, unless equalizer or other acceptable provisions assure safe distribution of both vertical and horizontal load to the cranes involved, in which case a lesser reduction may be applied.

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

HISTORY

1. Amendment of subsection (a) filed 2-13-75; effective thirtieth day thereafter (Register 75, No. 7).

2. Amendment filed 8-29-86; effective thirtieth day thereafter (Register 86, No. 39).

3. New subsections (b)(3)-(5) filed 1-29-2009; operative 2-28-2009 (Register 2009, No. 5).

4. Editorial correction of subsection (b)(3) (Register 2011, No. 8).

5. Amendment of subsections (a)-(b)(2) and (b)(2)(B), repealer of subsection (b)(2)(C), amendment of subsection (b)(3), repealer and new subsection (b)(4) and amendment of subsection (b)(5) filed 5-30-2013; operative 7-1-2013 (Register 2013, No. 22).

Go Back to Article 98 Table of Contents

crane outriggers pads