Spherical Lens Selection Guide

Plano-Convex Lenses are the best choice for focusing parallel rays of light to a single point, or a single line in the case of cylindrical lenses. This lens can be used to focus, collect and collimate light. It is the most economical choice for demanding applications. The asymmetry of these lenses minimizes spherical aberration in situations where the object and image are located at unequal distance from the lens. The optimum case is where the object is placed at infinity (parallel rays entering lens) and the final image is a focused point. Although infinite conjugate ratio (object distance/image distance) is optimum, plano-convex lenses will still minimize spherical aberration up to approximately 5:1 conjugate ratio. For the best performance, the curved surface should face the largest object distance or the infinite conjugate to reduce spherical aberration.

CLZ contains other products and information you need, so please check it out.

Bi-Convex Lenses are the best choice where the object and image are at equal or near equal distance from the lens. When the object and image distance are equal (1:1 magnification), not only is spherical aberration minimized, but also coma, distortion, and chromatic aberration are identically canceled due to the symmetry. Bi-convex lenses function similarly to plano-convex lenses in that they have a positive focal length, and focus parallel rays of light to a point. Both surface are spherical and have the same radius of curvature, thereby minimizing spherical aberration. As a guideline, bi-convex lenses perform within minimum aberration at conjugate ratios between 5:1 and 1:5. Outside this magnification range, plano-convex lenses are usually more suitable.

Plano-Concave Lenses are the best choice where object and image are at absolute conjugate ratios greater than 5:1 and less than 1:5 to reduce spherical aberration, coma, and distortion. Plano-Concave lenses bend parallel input rays so they diverge from one another on the output side of the lens and hence have a negative focal length. The spherical aberration of the Plano-Concave lenses is negative and can be used to balance aberrations created by other lenses. Similar to the Plano-Convex lenses, the curvature surface should face the largest object distance or the infinite conjugate (except when used with high-energy lasers where this should be reversed to eliminate the possibility of a virtual focus) to minimize spherical aberration.

Bi-Concave Lenses are the best choice where object and image are at absolute conjugate ratios closer to 1:1 with converging input beam. The output rays appear to be diverging from a virtual image located on the object side of the lens; the distance from this virtual point to the lens is known as the focal length. Similar to the Plano-Concave lenses, the Bi-concave lenses have negative focal lengths, thereby causing collimated incident light to diverge. Bi-Concave lenses have equal radius of curvature on both side of the lens. They are generally used to expand light or increase focal length in existing systems, such as beam expanders and projection systems.

Positive Meniscus Lenses are designed to minimize spherical aberration and are generally used in small f/number applications (f/number less than 2.5). The Positive Meniscus Lenses have a larger radius of curvature on the convex side, and a smaller radius of curvature on the concave side. They are thicker at the center compared to the edges. Positive meniscus can maintain the same angular resolution of the optical system while decreasing the focal length of the other lens, resulting a tighter focal spot size. A positive meniscus lens can be used to shorten the focal length and increase the numerical aperture of an optical system when paired with another lens. For the best performance, the curved surface should face the largest object distance or the infinite conjugate to reduce spherical aberration.

Spherical Lens Material Options

Lens Type N-BK7 UV Fused Silica CaF2 MgF2 ZnSe Crown/Flint Plano-Convex Bi-Convex Plano-Concave Bi-Concave Achromatic Doublet Cylindrical Lenses Plano-Convex Plano-Concave

Coatings

Optical coatings are generally applied as a combination of thin film layers on optical components to achieve desired reflection/transmission ratio. Important factors that affect this ratio include the material property used to fabricate the optics, the wavelength of the incident light, the angle of incidence light, and the polarization dependence. Coating can also be used to enhance performance and extend the lifetime of optical components, and can be deposited in a single layer or multiple layers, depending on the application. Newport&#;s multilayer coatings are incredibly hard and durable, with high resistance to scratch and stains.

Anti-Reflection Coating (AR coating)

Newport offers an extensive range of antireflection coatings covering the ultraviolet, visible, near infrared, and infrared regions. For most uncoated optics, approximately 4% of incident light is reflected at each surface, resulting significant losses in transmitted light level. Utilizing a thin film anti-reflection coating can improve the overall transmission, as well as minimizing stray light and back reflections throughout the system. The AR coating can also prevent the corresponding losses in image contrast and lens resolution caused by reflected ghost images superimposed on the desired image.

Newport offers three types of AR coating designs to choose from, the Single Layer Magnesium Fluoride AR coating, the Broadband Multilayer AR coating, and Laser Line AR V-coating. A single layer Magnesium Fluoride AR coating is the most common choice that offers extremely broad wavelength range at a reasonable price. It is standard on achromats and optional on our N-BK7 plano-convex spherical lenses and cylindrical lenses. Comparing to the uncoated surface, the MgF2 provides a significant improvement by reducing the reflectance to less than 1.5%. It works extremely well over a wide range of wavelengths (400 nm to 700 nm) at angles of incidence less than 15 degrees.

Broadband Multilayer AR coating improves the transmission efficiency of any lens, prism, beam-splitter, or windows. By reducing surface reflections over a wide range of wavelengths, both transmission and contrast can be improved. Different ranges of Broadband Multilayer AR coating can be selected, offering average reflectance less than 0.5% per surface. Coatings perform efficiently for multiple wavelengths and tunable laser, thereby eliminating the need for several sets of optics.

Explore more:
How Prism Glasses Work and When It's Prescribed
10 Questions You Should to Know about calcium fluoride optics for high-power lasers

For more information, please visit Commercial doublet lens wholesaler.

V-coatings offer the lowest reflectance for maximum transmission. With its high durability and high damage resistance, Laser line AR V-coating can be used at almost any UV-NIR wavelength with average reflectance less than 0.25% at each surface for a single wavelength. Valuable laser energy is efficiently transmitted through complex optical systems rather than loss to surface reflection and scattering. The trade off to its superior performance is the reduction in wavelength range. AR.33 for nm is available from stock on most Newport lenses. All other V-coating can be coated on a semi-custom basis.

Coating Wavelength Range
(nm) Reflectance Cost Features AR.10
Broadband
245&#;440 Ravg <0.5% Moderate Only available on UV fused silica lenses MgF2
Broadband
Broadband
400&#;700 Ravg <1.5% Low Available on achromats, KPX series, and Cylindrical lenses AR.14
430&#;700 Ravg <0.5% Moderate Best choice for broadband visible applications AR.15
Broadband
250&#;700 Ravg <1.5% Moderate Great choice for broadband UV to visible applications AR.16
Broadband
650&#; Ravg <0.5% Moderate Excellent for NIR laser diode applications AR.18
Broadband
&#; Ravg <0.5% Moderate Ideal for telecom laser diode applications V-Coat Multilayer, AR.27 Laser Line
532 Rmax <0.25% High Highest transmission at a single wavelength V-Coat Multilayer, AR.28 Laser Line
632.8 Rmax <0.25% High Highest transmission at a single wavelength AR.33
Laser Line
Rmax <0.25% Moderate Highest transmission at a single wavelength

Ecoptik offers achromatic coated lenses which are used to minimize spherical and chromatic aberrations. They are ideal for a range of applications, including fluorescence microscopy, image relay, inspection, or spectroscopy. Such a lens is often made by either cementing two elements together or mounting the two elements in a housing.

The achromatic coated lens can also be called an achromatic doublet lens or achromatic cemented lens. If you want to know more information, please contact us.

See us at SPIE Photonics West in San Francisco, January 25&#;30 (booth )!

Shanghai Optics offers a large variety of custom achromatic lenses for our customers including achromatic spherical and aspherical lenses, achromatic singlets, doublets and triplets. Combined with one of our advanced AR coatings (covering 400&#;700 nm, 650&#; nm, &#; nm), these optimized lenses are ideal for ensuring high resolution image quality and durability. With our in-house state-of the-art metrology and professional testing personnel, Shanghai Optics is able to provide a full range of inspection reports and CoC (Certificate of Conformance) for full optical characterization such as surface quality, dimensions, centricity, coating transmittance/reflectance (with SHIMADU UV spectrophotometer), and overall/partial surface accuracy (with 6-inch ZYGO interferometer). FAI inspection reports are available upon request.

Knight Optical's offers achromatic lenses used to minimise chromatic and spherical aberrations. These achromatic doublet lenses are available in focal lengths up to 500 mm and are ideal in imaging applications, laser collimation, and as objective lenses in telescopes and other instruments. Custom achromatic lenses are available upon enquiry including triplet lenses and additional coatings. We also offer achromatic waveplates suitable for 450&#;680 nm, 700&#; nm, 950&#; nm, and &#; nm wavelength ranges, with applied AR coatings for consistent phase retardation over the entire wavelength.

Dayoptics has specially designed achromatic waveplates, containing two pieces of plates. They are similar to zero-order waveplates, except that the two plates are made from different materials, such as crystal quartz and magnesium fluoride. The bandwidth of such achromatic waveplates is very wide, meaning a nearly constant retardance over a large range of wavelength.

See us at SPIE Photonics West in San Francisco, January 25&#;30 (booth , )!

Want more information on Optical Filters export? Feel free to contact us.