What Is The Difference Between SMD 5050 And 2835?

Dec. 23, 2024

What Is The Difference Between SMD And ?

LED strip lights are convenient, compact, & flexible to fit into tight spaces and light up your ambiance. They don&#;t need a lot of energy, nor do they emit harmful chemicals or gases.

Link to Moonleds

If you are looking for a popular LED type, you can select from SMD or SMD . These two strip lights are very popular in the market.

However, they are different from each other. So, let us check out more about the difference between these two.

SMD LED: What is it?

SMD is an acronym for Surface Mount Device. It is a diode that emits light and is shaped like a small cube. SMDs can easily be SMD is attached to the PCB is a printed circuit board, SMD and PCB are part of the LED strip.

Surface Mount design allows the SMD to be placed atop a printed circuit. This helps make the strip light, compact & light in weight.

SMD LEDs are:

Rectangular or square in shape
Have a compact size
Have short leads
Highly efficient
Pack in more lumens in a smaller dimension
Customizable in terms of output power

To get more details about SMD LEDs, you can check out this article.

Decoding the LED Lamp Beads Codes: SMD vs SMD

You might be wondering what these numbers mean in LED strip lights. It might seem a bit complicated, but it is very simple. For context, these SMD&#;s vertical length represents length while the Horizontal width represents width. The numbers represent the LED SMD&#;s size which is added to the strip. For example, SMD has an SMD dimension of 5.0mm X 5.0mm.

Similarly, SMD has a chip dimension of 2.8mm X 3.5mm. As is obvious from these SMD sizes, SMD is bigger than SMD . In both cases, the first dimension represents the length while the second represents the width of the SMD.

LED strips with numbers and aren&#;t very different. It is only the size factor that sets them apart from one another.

Moreover, belongs to the first-gen surface mount design, while is from the 2nd gen. With , you might see some color shifts or shadow, given the uneven spacing. However, &#;s package design shows fewer fringe yellowing issues.

SMD : What is it?

The SMD is used mostly with strip lights that have 60 LEDs/meter. These strips would be able to pull about 14.4 watts of energy at 12 or 24 volts. They are commonly termed as 15w p/m, or 14.4w p/m LED tapes. The output is about 990 to lumens/meter, depending on the color. You get an LED strip with a bright and smooth lighting effect on the surface.

If you have SMD , it would mostly have 60 LEDs/m at 24 volts drawing 14.4 watts of energy. This SMD are commonly referred to as 15 w p/m or 14.4 w p/mStrip. The color you choose can decide the lumens, which typically range between 990 and lumens/meter.

Most SMD provides a smooth lighting effect with a bright tint. To learn more about lumens & other lighting facts, click here.

SMD is normally available in colors that include:

Cool and warm whites (You can request other colors to be custom-made from a manufacturer of your choice)
Green, red, blue, amber, & yellow (single-color)
Color-changing variants that are either RGBW or RGB tend to use quad or tri chips (having 3 or 4 LED chips within one)

The SMD strip light is used for generic light purposes like corridor lighting, homes, restaurants, bars, hotels, & more. This SMD has a &#;tri&#; or &#;triple&#; chip design. It has three smaller chips within each SMD.

Each of the SMD white LEDs features three white chips within. These SMDs can be used in LED Strip with the color-changing feature. It houses green, red, & blue chips within each LED. You can link these RGB strip lights with a controller and mix up different shades of colors.

The RGBW light strip tape tends to function in a similar way. However, it uses a &#;quad&#; LED chip design with a white chip as an additional one.

Types of RGB SMD Strips

These LED strips are of two types:

30 LEDs/meter variant has a maximum of 500 lumens/meter output. It is perfect for lighting covings, hotels, plinths, restaurants, bars, etc.

60 LEDs/meter variant has a maximum of lumens/meter output. It is perfect for bright lighting such as restaurant back bars, bar frontage, home, or clubs.

You can get SMD strips of both these variants with an IP20/IP33/IP44/IP65/IP67/IP68 rating from your local manufacturer. To learn more about other waterproof ratings for LEDs, check out this blog.

SMD : What is it?

SMD is the latest and most popular choice in the LED strip light market. With 2.8mm x 3.5 mm dimensions, this light strip variant is currently only available in white.

The LED variant is practically more efficient as compared to SMD. It produces about 20 percent more light while drawing less power. Each of the SMD LED strips pulls about 0.2 watts of power.

With SMD , you can mount as many as 120 LEDs/meter. As they are smaller, they don&#;t heat up as much as SMD LEDs. The LED strip has a single 0.2W SMD. Yet, the final product only uses 0.1W, which is half the power.

An SMD in cool white color with 60 LEDs/m would give you about lumens/m drawing about 7.2watts/meter energy. Similarly, SMD of the same color with 120 LEDs would give you lumens/m drawing about 14.4watts/meter.

In comparison, the SMD with 60 LEDs would take up 14.4watts/meter energy while delivering lumens/meter. This is a higher energy consumption compared to the , 60-LED variant.

Does SMD&#;s size in the LED matter?

Yes, the SMD size does matter when selecting the right LED for your lighting needs. The SMD size impacts the diode&#;s size that can be held within. This means a large diode would be brighter.

However, the same isn&#;t always true. In an SMD , you get a brighter output with more power consumption.

Alternatively, the SMD is efficient and draws less power to produce the same brightness level.

SMD uses a diode that uses the space within the chip in a better way. It uses the complete surface within the chip. However, SMD has a circular diode. It leaves a lot of unused space, thereby limiting the brightness produced.

Another advantage of using SMD is its design for better heat dissipation. Automatically, the SMD would experience a long lifespan compared to SMD . Here is an article explaining more about thermal management in White LEDs such as SMD.

However, if you are looking for color customization in your LED strip, SMD would be preferable. With , you can go for RGB or RGBW color customizing. It is possible because the s can combine 3 different chips inside its housing. They can produce more than 16 million combinations of colors. However, they do struggle when creating a bright white light.

If you plan on creating a white light space, opting for dedicated strips is ideal.

Does a big LED chip use up more electricity?

Technically, bigger & brighter LED chips use more power. However, the factors can vary depending on its design.

SMD with 0.2 watts power draw/chip would average about 720 to lumens. Alternatively, SMD with 0.24 watts power draw/chip would average about lumens.

The luminous flux of a single SMD 0.2 W is 22 to 28lm. But, the luminous flux of SMD of 0.18 W is 18 to 22lm. This describes its brightness in comparison to .

Moreover, a single bare SMD of 0.2W and 60mA uses only half, which is 0.1W and 30mA. But, the single bare lamp bead of 0.2W and 60mA uses 0.15W and 50mA.

Single SMD has a luminous flux from 22 to30lm, Single SMD has a luminous flux from 21 to23lm.

For a meter length of the strip, SMD would draw higher power when compared to . But, the SMD would often be brighter. Technically, has 4 powers that include 0.1W, 0.2W, 0.5W, and 1W. The SMD has only one, which is 0.2W power.

Are higher-density SMDs better than bigger SMDs?

Simply put, the density of an LED strip is the number of diodes arranged per meter. Apart from the size, you also need to consider the SMD&#;s density.

Standard LEDs tend to have about 30 LEDs per meter. However, there are strips that have 60, 120, & even more chips per meter. However, this isn&#;t possible with every type of SMD size.

For example, an SMD chip is 5mm x 5mm across. So, the SMD must not touch each other or be too crowded. There should be proper spacing between each SMD for proper wiring & heat dissipation.

Most SMD strips feature a maximum of 30 to 60 LED/meter. This is the maximum possible space available in the LED strips. The SMDs can achieve up to 120LED/m.

With smaller LED SMDs such as SMD , one can comfortably fit about 120 LEDs/meter. So, you get access to a brighter strip that goes about lumens/meter. The SMD can achieve up to 240 LED/m.

The concept is about much more than brightness. A known benefit of using a high-density light strip is getting access to uniform lighting. With closely-packed LEDs, the light seems more uniform with a continuous light source.

This doesn&#;t mean one needs to purchase high-density LED strips for uniform lighting needs. The location where you attach your strip light can help you achieve a similar effect.

If the light can be diffused behind a surface to be illuminated, it can give you uniform lighting. You can place your light inside a coving or facing upwards to create a diffused/uniform effect.

Conclusion

As seen in this article, the obvious difference between SMD and SMD is the SMD&#;s size. Although other factors do matter, the size has a major impact. It can alter the power efficiency, brightness, & heat dissipation.

If you are seeking an efficient design, you can opt to shop for SMD strips. But, if you need a color customization choice, you can go for SMD strips. Bear in mind that a strip might be a tad expensive as compared to .

LED Datasheet - The Ultimate Guide!

One of the most common types of SMD LED Modules are the SMD LED Module. This type of LED is used for backlighting, home illumination, interior lighting, automobile lighting and many more types of lighting applications.

In this article, we&#;ve compiled all the different LED&#;s that are available along with the technical specifications. We will continue to keep this list updated with the latest information. Be sure to bookmark this page, and share it with your friends.

Update: We&#;ve now added our new and improved technical datasheets for our latest lines of higher quality LED strips: AcuVivid&#; White, AcuVibrant&#; RGB, and AcuHue&#; RGBW & RGBA series.

ACUVIVID-24CVXX- ( K, K, K)

The SIRS-E® AcuVivid&#; CV White LED strip series consists of High Quality Constant Voltage variants with color temperatures, but not limited to, K, K and K. At a color rendering rating of 95+ CRI, AcuVivid&#; provides optimal color consistency and an increased luminous flux with greater efficacy while complying with all safety requirements as defined by UL standards.

Less than 1-Step MacAdam ellipse in the same run, easily mountable utilizing 3M VHB Aero-Grade tape, engineered to dissipate heat and reduce voltage drop via 4 oz flexible PCB.

High Color Rendering Rating +95 CRI
Increased Luminous Flux +330 lm/ft
Improved Luminous Efficacy +80 lm/W
Minimal Power Consumption 4.1 W/ft
Very Low Color Shift Duv +0.
UL Listed, Class 2 &#; E

The AcuVivid&#; series provides solutions for an endless set of applications including commercial, residential, stage & studio, theatrical, and specialized lighting designs.

Delivering superior LED strip lighting with a proven record spanning more than a decade without electrical, chromatic, or color rendering issues. SIRS-E® continues to lead the market place in stability, reliability, and efficiency of LED lighting and lighting control systems.

The SIRS-E® AcuVibrant&#; CV RGB LED strip series, consists of High Quality Constant Voltage variants with the ability to create millions of color &#;vibrant&#; rendering options offered by color mixing diodes. AcuVibrant&#; provides consistent, color rich illuminations with optimal efficacy while complying with all safety requirements as defined by UL standards.

Easily mountable utilizing 3M VHB Aero-Grade tape, engineered to dissipate heat and reduce voltage drop via 4 oz flexible PCB.

Increased Luminous Flux +230 lm/ft
Improved Luminous Efficacy +50 lm/W avg
Minimal Power Consumption 3.6 W/ft
UL Listed, Class 2 &#; E
25% more lumen output than our previous RGB series

The AcuVibrant&#; series provides solutions for an endless set of applications including commercial, residential, stage & studio, theatrical, bars and specialized lighting designs.

ACUHUE-12CVXX- ( K, K, 590nm)

The SIRS-E® AcuHue&#; CV RGBW LED strip series, consists of High Quality Constant Voltage variants with the ability to create billions of color rich rendering options offered by the addition of a fourth color diode to the RGB equation, including K, K white diodes or Amber. With optimal luminosity and superior efficacy, AcuHue&#; provides for limitless applications while complying with all safety requirements as defined by UL standards.

Easily mountable utilizing 3M VHB Aero-Grade tape, engineered to dissipate heat and reduce voltage drop via 4 oz flexible PCB.

Increased Luminous Flux +420 lm/ft
Improved Luminous Efficacy +60 lm/W avg
Minimal Power Consumption 5.75 W/ft
UL Listed, Class 2 &#; E

The AcuHue&#; series provides solutions for an endless set of applications including commercial, residential, stage & TV studio, theatrical, film sets, cove lighting and specialized lighting designs.

ACUHUE-12CCXX- ( K, K, 590nm)

The SIRS-E® AcuHue&#; CC RGBW LED strip series, utilizes Constant Current Control to provide for ideal color consistency with no brightness loss or voltage drop through the use of high quality integrated circuits embedded directly on the flexible strip. AcuHue&#; CC has the ability to produce billions of color variations.

Easily mountable utilizing 3M VHB Aero-Grade tape, engineered to dissipate heat and reduce voltage drop via 4 oz flexible PCB.

Max run of 32ft /10m with no brightness loss, powered only from one end
Increased Luminous Flux +530 lm/ft
Improved Luminous Efficacy +125 lm/W
Minimal Power Consumption 6.5 W/ft

The AcuHue&#; series provides solutions for an endless set of applications including commercial, residential, stage & studio, theatrical, and specialized lighting designs.

-LED-WH-DD

LED WH DD STRIP DATASHEET INFORMATION

LED Density: 18 / ft | 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

SMD LED WH DD POWER CONSUMPTION

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max: 3.52W /ft | 11.54W /m | 57.72W /5m Reel
Current Draw / Input Current / Current Max: mA | 4.81A | per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% | 5m = 16%
Power Drop with V+ In on Both Sides Approx: 1m = 5% 5m = 6%

PHOTOMETRY

Light Color: Neutral White &#; &#; 5,500°K
Peak Wave Length (nm) Approx: N/A
Brightness (Lumen) Tested at full intensity: 465lm/ft | lm/m | lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.9 oz | 82.21g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL ; E

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization:USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

Due to our constant revisions/upgrades of our line of White LED Strips, lumen output increases with every generation
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

LED WH STRIP DATASHEET INFORMATION

LED Density: 9 / ft | 30 /m
LED Count (Total): 150 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

SMD LED WH POWER CONSUMPTION

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max:1.84W /ft | 6.05W /m | 30.24W /5m Reel
Current Draw / Input Current / Current Max: mA | 2.52A | per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 5% | 5m = 12%
Power Drop with V+ In on Both Sides Approx: 1m = 3% 5m = 4%

PHOTOMETRY

Light Color: Neutral White &#; &#; 5,500°K
Peak Wave Length (nm) Approx: N/A
Brightness (Lumen) Tested at full intensity: 232lm/ft | 762lm/m | lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.2 oz | 62.37g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL ; E

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization:USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

Due to our constant revisions/upgrades of our line of White LED Strips, lumen output increases with every generation
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

LED WHWP STRIP DATASHEET INFORMATION

LED Density: 9 / ft | 30 /m
LED Count (Total): 150 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

SMD LED WHWP POWER CONSUMPTION

PHOTOMETRY

Light Color: Neutral White &#; &#; 5,500°K
Brightness (Lumen) Tested at full intensity: 232lm/ft | 762lm/m | lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP67
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 6.6 oz | 187.11g
LED Strip Warranty: 1 Year Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization:USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

Due to our constant revisions/upgrades of our line of White LED Strips, lumen output increases with every generation
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

LED INFO ON LED STRIP

LED Density: 9 /ft 30 /m
LED Count (Total): 150 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 1.78W /ft | 5.85W /m | 29.26W /5m Reel
Current Draw / Input Current / Current Max: mA | 2.44A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 6% 5m = 15%
Power Drop with V+ In on Both Sides Approx. 1m = 3% 5m = 4%

PHOTOMETRY

Light Color: RGB &#; Red, Green, Blue |16 Million Color Possibilities
Peak Wave Length (nm) Approx. R: 625nm | G: 524nm | B: 471nm
Brightness (Lumen) Tested in all colors at full intensity: 123lm/ft | 402lm/m | lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission None
Lifespan / Average Lifetime / Lumen Maintenance 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

-LED-RGBWP-3

LED INFO ON LED STRIP

LED Density: 9 /ft 30 /m
LED Count (Total): 150 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.14W /ft |10.31W /m | 51.56W /5m Reel
Current Draw / Input Current / Current Max: mA | 4.30A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 10% | 5m = 23%
Power Drop with V+ In on Both Sides Approx. 1m = 6% 5m = 9%

PHOTOMETRY

Light Color: RGB &#; Red, Green, Blue, 16 Million Color Possibilities
Peak Wave Length (nm) Approx. R: 625nm | G: 524nm | B: 471nm
Brightness (Lumen) Tested in all colors at full intensity: 245lm/ft | 804lm/m | lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission None
Lifespan / Average Lifetime / Lumen Maintenance 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.7 oz | 76.54g
LED Strip Warranty: 3 Years Limited UL
Certification: UL Listed; UL ; E

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

-LED-RGB-DD

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 1.78W /ft 5.85W /m 29.26W /5m Reel
Current Draw / Input Current / Current Max: mA 2.44A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 6% 5m = 15%

PHOTOMETRY

Light Color: RGB &#; Red, Green, Blue, 16 Million Color Possibilities
Peak Wave Length (nm) Approx. R: 625nm G: 524nm B: 471nm
Brightness (Lumen): 123lm/ft 402lm/m lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission None
Lifespan / Average Lifetime / Lumen Maintenance 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 1.31in 33.30mm
LED Spacing Between Edges (Inches | Millimeters): 1.11in 28.20mm
Minimum Cuttable Segments (Inches | Millimeters): 3.94in 100mm (3 LEDs)
Width (Inches | Millimeters): 0.50in 12.70mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

-LED-RGBWP-DD

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.14 W /ft 10.31 W /m 51.56 W/ 5m Reel
Current Draw / Input Current / Current Max: mA 4.30A 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 10% 5m = 23%

PHOTOMETRY

Light Color: RGB &#; Red, Green, Blue, 16 Million Color Possibilities
Peak Wave Length (nm) Approx. R: 625nm G: 524nm B: 471nm
Brightness (Lumen): 245 lm/ft 804 lm/m lm/Reel (5m)
Beam Angle: 120˚
UV/IR Emission None
Lifespan / Average Lifetime / Lumen Maintenance 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): .69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): .47in 12mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm (3LEDs)
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

-LED-RGBWP-DD-3

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

PHOTOMETRY

DIMENSIONS

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP68
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 3.7 oz 388g
LED Strip Warranty: 3 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

-LED-4RGBWH-72-A

LED INFO ON LED STRIP

LED Density: 22 /ft 72 /m
LED Count (Total): 360 Per Reel
LED Type: High Quality Selected SMD 4-in-1 RGBWH
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 4.28W /ft 14.03W /m 70.14W /5m Reel
Current Draw / Input Current / Current Max: mA 5.85A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 12% 5m = 27%
Power Drop with V+ In on Both Sides Approx: 1m = 9% 5m = 13%

PHOTOMETRY

Light Color: RGB &#; RGBWH &#; &#; Red, Green, Blue, Neutral White
Peak Wave Length (nm) Approx. R: 630nm G: 520nm B: 490nm Neutral White: 5,500°K
Brightness (Lumen) Tested in all colors at full intensity: 371lm/ft lm/m lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.54in 13.70mm
LED Spacing Between Edges (Inches | Millimeters): 0.35in 9mm
Minimum Cuttable Segments (Inches | Millimeters): 1.64in 41.60mm (Every 3 LEDs)
Width (Inches | Millimeters): 0.47in 12mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: White
LED Strip Net Weight (Without Packaging Material): 3.5 oz 99.2g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL ; E

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

Contact us to discuss your requirements of China SMD LED supply. Our experienced sales team can help you identify the options that best suit your needs.

Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-4RGBWW-72-A

LED INFO ON LED STRIP

LED Density: 22 /ft 72 /m
LED Count (Total): 360 Per Reel
LED Type: High Quality Selected SMD 4-in-1 RGBWW
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 4.23W /ft 13.88W /m 69.42W /5m Reel
Current Draw / Input Current / Current Max: mA 5.79A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 12% 5m = 25%
Power Drop with V+ In on Both Sides Approx: 1m = 9% 5m = 13%

PHOTOMETRY

Light Color: RGBWW &#; &#; Red, Green, Blue, Warm White
Peak Wave Length (nm) Approx:R: 630nm G: 520nm B: 463nm Warm White: 2,950°K
Brightness (Lumen) Tested in all colors at full intensity: 339lm/ft lm/m lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

-LED-4RGBA-72-A

LED INFO ON LED STRIP

LED Density: 22 /ft 72 /m
LED Count (Total): 360 Per Reel
LED Type: High Quality Selected SMD 4-in-1 RGBA
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 4.30W /ft 14.09W /m 70.45W /5m Reel
Current Draw / Input Current / Current Max: mA 5.87A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 12% 5m = 23%
Power Drop with V+ In on Both Sides Approx: 1m = 9% 5m = 12%

PHOTOMETRY

Light Color: RGBA &#; Red, Green, Blue, Amber
Peak Wave Length (nm) Approx: R: 630nm G: 520nm B: 463nm Amber: 595nm
Brightness (Lumen) Tested in all colors at full intensity: 305lm/ft lm/m lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

-LED-4RGBA-72-AWP3

LED INFO ON LED STRIP

POWER*

PHOTOMETRY

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.54in 13.70mm
LED Spacing Between Edges (Inches | Millimeters): 0.35in 9mm
Minimum Cuttable Segments (Inches | Millimeters): 1.64in 41.60mm (Every 3 LEDs)
Width (Inches | Millimeters): 0.56in 14.32mm
Height (Inches | Millimeters): 0.18in 4.60mm
Cable Leads (Inches | Millimeters): 12in 304.80mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP68
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: White
LED Strip Net Weight (Without Packaging Material): 18.2 oz 515.9g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL ; E

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

-LED-WHWP-DD3

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.52 W /ft 11.54 W /m 57.72 W/ 5m Reel
Current Draw / Input Current / Current Max: mA 4.81A 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 16%

PHOTOMETRY

Light Color: Neutral White &#; 5,500°K
Brightness (Lumen) Tested in all colors at full intensity: 465 lm/ft | lm/m | lm/Reel (Aprox.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): .69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 47in 12mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm (3 LEDs)
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-CW-DD

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.18W /ft 10.42W /m 52.08W /5m Reel
Current Draw / Input Current / Current Max: mA 4.34A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 17%
Power Drop with V+ In on Both Sides Approx: 1m = 3% 5m = 4%

PHOTOMETRY

Light Color: Cool White &#; &#; 13,000°K
Peak Wave Length (nm) Approx: N/A
Brightness (Lumen): 350lm/ft lm/m lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm
Width (Inches | Millimeters): 0.39in 10mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.9 oz 82.21g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL ; E

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-CWWP-DD

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

PHOTOMETRY

Light Color: Cool White &#; &#; 13,000°K
Brightness (Lumen): 350lm/ft lm/m lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-CWWP-DD3

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.18 W /ft 10.42 W /m 52.08 W/ 5m Reel
Current Draw / Input Current / Current Max: mA 4.34A 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 17%

PHOTOMETRY

Light Color: Cool White &#; 13,000°K
Brightness (Lumen): 350 lm/ft | lm/m | lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): .47in 12mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm (3 LEDs)
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-WW-DD

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.44W /ft 11.28W /m 56.40W /5m Reel
Current Draw / Input Current / Current Max: mA 4.70A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 17%
Power Drop with V+ In on Both Sides Approx: 1m = 4% 5m = 6%

PHOTOMETRY

Light Color: Warm White &#; &#; 2,950°K
Peak Wave Length (nm) Approx: N/A
Brightness (Lumen): 544lm/ft lm/m lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.9 oz 82.21g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL ; E

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-WWWP-DD

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

PHOTOMETRY

Light Color: Warm White &#; &#; 2,950°K
Brightness (Lumen): 544lm/ft lm/m lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-WWWP-DD3

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

PHOTOMETRY

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-RGBWP-34DMX5M

LED INFO ON LED STRIP

LED Density: 10 /ft 34 /m
LED Count (Total): 170 Per Reel (1 LED = 1 Pixel)
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 5V DC
Power Consumption (Watts) Max.: 1.57 W /ft 5.14 W /m 25.7 W/ 5m Reel
Current Draw / Input Current / Current Max: mA 5.14A per 5m Reel
Power Drop Along the Strip (Meter) Approx: N/A (power is required on both sides of the strip)

PHOTOMETRY

Light Color: RGB &#; Red, Green, Blue
Peak Wave Length (nm) Approx: Red: 625nm Green: 524nm Blue: 471nm
Brightness (Lumen) Tested in all colors at full intensity: 152.07 lm/ft 498.8 lm/m lm/Reel (5m)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 1.14in 29mm (Pixel Pitch)
LED Spacing Between Edges (Inches | Millimeters): 0.94in 23.93mm
Minimum Cuttable Segments (Inches | Millimeters): 1.15in 29.29mm (1 LED)
Width (Inches | Millimeters): 0.55in 13.90mm
Height (Inches | Millimeters): 0.14in 3.65mm
Cable Leads (Inches | Millimeters): 32in 812.8mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP67
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Black
LED Strip Net Weight (Without Packaging Material): 10.8 oz 306.17g
LED Strip Warranty: 1 Year Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-RGBA-DD-A

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 1.87 W /ft 6.00 W /m 30.0 W/ 5m Reel
Current Draw / Input Current / Current Max: mA 2.57A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = ~4% 5m = ~20%

PHOTOMETRY

Light Color: RGB &#; Red, Green, Blue, Amber
Peak Wave Length (nm) Approx: Red: 630 Green: 520 Blue: 463 Amber: 592
Brightness (Lumen): 121.95 lm/ft 400 lm/m lm/Reel (5m)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.60in 15.28mm
LED Spacing Between Edges (Inches | Millimeters): 0.44in 11.35mm
Minimum Cuttable Segments (Inches | Millimeters): 3.94in 100mm (Every 6 LEDs)
Width (Inches | Millimeters): 0.47in 11.95mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

-LED-RGBWW-DD-A

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 2.30 W /ft 7.56 W /m 37.8 W/ 5m Reel
Current Draw / Input Current / Current Max: mA 3.15A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = ~4% 5m = ~20%

PHOTOMETRY

Light Color: RGBWW &#; Red, Green, Blue, Warm White
Peak Wave Length (nm) Approx: R: 630nm G: 520nm B: 463nm 592 Warm White: 2,700 K
Brightness (Lumen): 121.95 lm/ft 400 lm/m lm/Reel (5m)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 &#; 75,000 Hours (50% Brightness Loss)

DIMENSIONS

LED STRIP INFORMATION

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

(*) NOTES

The company is the world’s best China smd led chip wholesale supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

The Strip Power Rating was measured with power input on both ends
A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
LED electrical and optical characteristics change with the die manufacturing date.
LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
We reserve the right to change any data without prior notice.

Comments

All Comments (0)

Previous: None
Next: None